NESTOR MARTIN NIQ43 Instructions D'installation, De Service Et D'entretien page 40

Fig. 4
1.5. INSERT PLACEMENT
Comply with the minimum recessed dimensions.
Case 1 - Hot air outlet only in front: Leave the two deflectors and the
plug holes.
Case 2 - Hot air outlet both through the tubes and from the front
(fig. 5):

Remove the cover (6 screws)

Remove the two steel deflectors

Replace the stopper holes with steel nozzles
Note: It is possible to remove the deflector through the hole filler
(without removing the cover)
Nozzle
Configuration type 1, with overhanging frame
F + 20mm
Fig. 7
Fig. 6
M +
30mm
M
D
40
Cover
Stopper hole
Deflector
Max. 100mm