KitchenAid KFP0718 Manuel Du Propriétaire page 6

USING THE FOOD PROCESSOR
BEFORE FIRST USE
Before using your Food Processor for the first time, wash all parts and accessories either
by hand or in the dishwasher (see the "Cleaning the Food Processor" section). Your Food
Processor is designed so that all accessories may be stored inside the work bowl.
Lift up the lid latch to unlock the
cover. Tilt the work bowl cover back
1
and lift it straight up so that the lid
hinge pulls out of the handle hinge.
ASSEMBLING THE FOOD PROCESSOR
IMPORTANT: Place the Food Processor on a dry, level countertop with the controls
facing forward. Do not plug in the Food Processor until it is completely assembled.
Place the work bowl on the base,
aligning the handle with the raised
button on the right side of the base.
1
The bowl will click into place and
should be flush against the base
when properly aligned.
6 | USING THE FOOD PROCESSOR
Remove all parts and accessories
2
from the work bowl, and lift the food
pusher out of the feed tube.
Place the drive adapter in the work
2
bowl, lowering it onto the drive pin.