Télécharger Imprimer la page

Inventum MK750 Mode D'emploi page 10

Publicité

Les langues disponibles

Les langues disponibles

2
appliance description
1.
Lid with sealing ring
2.
Milk jug
3.
Frothing and heating ­
4.
Cold frothing ­
5.
Base with heating element
6.
Maximum indication for heating milk ­ MAX
7.
Maximum indication for frothing ­ MAX
8.
Minimum indication
9.
Mixer (heating)
10. Whisk (frothing)
3
before the first use
Before you use the appliance for the first time, please do
as follows: Carefully unpack the appliance and remove all
the packaging material. Keep the material (plastic bags and
cardboard) out of reach of children. Check the appliance after
unpacking for any visible damage, possible from transportation.
Place the appliance on a stable and heat resistant surface.
Clean the milk jug, the lid, the whisk and the mixer with warm
soapy water. Dry the parts thoroughly. Make sure that the parts
are completely dry.
Wipe the exterior with a soft damp cloth and dry thoroughly. The
appliance is only suitable heating and frothing milk. Never fill the
appliance with other drinks.
10
English
1
2
3
4
4
preparing milk foam
Check that the voltage in your home corresponds with the
voltage printed on the bottom of the appliance and plug
the appliance in. Lift the lid and fit the whisk in the jug. Fill
the desired amount of milk into the jug. Do not exceed the
maximum of the lower max. mark ­ MAX
milk expands and causes the pitcher to overflow, if filled up too
high. The minimum capacity is 75 ml. Put the lid back on the jug
and place the appliance on the base.
Frothing and heating
Press the button
light in the button will light up and the whisk will start turning.
Depending on the filling volume, the preparation stops
automatically after 90 to 140 seconds. The control light goes
out.
Just frothing
Press the button
control light in the button will light up and the whisk will start
turning. Depending on the filling volume, the preparation stops
automatically after 120 seconds. The control light goes out.
After the preparation is completed, remove the lid upwards and
pour or ladle the milk foam into a cup or bowl.
After having used the frother, clean the appliance as described
in the chapter Cleaning & Maintenance.
5
6
7
8
9
10
­ 200 ml. Frothed
to start the preparation. The red control
to start the preparation. The blue

Publicité

loading