Krups XP344040 Mode D'emploi page 34

PROBLEMS
The appliance
work
The steam wand does not
foam the milk.
If it is not possible to identify the cause of a malfunction, please contact an approved
service centre. Never disassemble the appliance. (if the appliance has been
disassembled, the guarantee may no longer be valid).
ELECTRIC OR ELECTRONIC PRODUCT AT END
We participate in the protection of the environment!
Your appliance contains a number of materials that can be reused or recycled.
Take it to a collection point or an approved service centre so that it can be dealt
with appropriately.
31
POSSIBLE CAUSES
doesn't The pump
deactivated due to a lack
of water.
The removable water tank
has been fitted incorrectly.
The steam
blocked or has an excess
of limescale.
The milk is too hot.
The shape of the container
is not suitable.
OF LIFE
has been Fill the tank with water
and re-initiate the pump
(see paragraph: USING
FOR THE FIRST TIME).
Avoid emptying the tank
completely.
Position the water tank
correctly.
wand is Descale the steam wand
according to the paragraph
on Descaling or unblock it
using a needle.
Use fresh milk.
Use
Follow the milk foaming
instructions (paragraph on
STEAM FUNCTION).
SOLUTIONS
a small jug.