Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Start cooking
Use of the touch keys
Place the tip of your finger flat on a key or the slider to achieve the best results. You do not
have to apply any pressure. The touch keys only react to the light pressure of a fingertip.
Do not operate the controls with any other objects.
Each key or the slider activation is followed by a sound signal.
1. Touch and hold the On/Off key until you hear an audio signal.
▷
All displays show '-' and '--' (timer display), indicating that the induction hob has entered
the state of standby mode.
2. Place a suitable pan on the cooking zone.
▷
Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
3. Touch a slider to select a power setting.
▷
A short audio signal will sound.
The power level indicator is flashing.
▷
When the pan detection symbol flashes:
•
you have not placed a pan on the correct cooking zone;
•
the pan you're using is not suitable for induction cooking;
•
the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
▷
▷
The display will automatically turn Off after 2 minutes if no suitable pan is placed on it.
If the hob is not used for 60 seconds, it will stop automatically.
EN 14
<--------------------->
Publicité
