WAGNER W 990 FLEXIO Manuel D'instructions page 42

GB D
11. Use the Standard spray
attachment and other
spray attachments
(accessories)
You only need the turbine unit
i
to operate the Standard spray
attachment.
Do not set aside the spray
attachment if it is filled with
paint.
•
Separate the DirectFeed spray attachment
(fig. 10, 1) from the turbine unit (2).
•
Disconnect the power plug on the turbine
unit from the material hose.
•
Disconnect the turbine unit power plug from
the material hose.
•
Connect the Standard spray attachment (fig.
10, 3) to the turbine unit (2).
•
Insert the turbine unit power plug into the
socket.
Always plug the turbine unit into a
i
separate socket if you are working
with the Standard attachment. If
the turbine unit is connected to
the material hose, the pump will
run unnecessarily which leads to
increase wear and tear and energy
consumption.
Further information about the spray
i
attachment can be found in the
provided Operating Manual of the
Standard spray attachment. Please
also read the information about
regulating the air flow and spraying
techniques in chapters 14 and 17.
40 40
W 990 Flexio W 990 Flexio

1
3
click
2
2