Toto ZL Manuel D'installation Et D'utilisation page 11

ill. 17
Toothbrush
ill. 18
Spout
)
O-Ring
(Semi
Transparent)
Nozzle Screen
Case
Hexagonal wrench
(2mm)
ill. 19
MAINTENANCE
Nozzle
screen
Nozzle Screen-
Case
Nozzle Screen
Case
Press it IN
with a finger
Set screw
(M3x7)
Leak
11
3. Remove dirt and debris
caught in the nozzle screen using
a toothbrush, etc. (ill. 17)
4. Assemble the nozzle screen
case on the spout and lock it in
place with the set screw.
Press the nozzle screen case
into the spout with a finger and
tighten the setscrew. (ill. 18)
5. When mounting work is com-
plete, check the nozzle screen
for any water leaks. If the nozzle
screen case is not mounted prop-
erly, re-mount it. (ill. 19)