Télécharger Imprimer la page

EUROM 342192 Manuel D'utilisation page 43

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 45
minutes, and go to standby. In this case, you can turn the unit on again using
the on/off button.
Press the
disappears from the display and the unit returns to its previous settings.
If the heater is set to come on in a weekly programme and you turn the open
window detection on, this will only work while the unit is switched on in the
weekly programme.
Overheating protection
The overheating protection system switches the unit off if it gets too hot. This will
happen if the unit is unable to get rid of enough heat or if it cannot take in enough
fresh air. Common reasons for this are that the unit has been partially or completely
covered, the intake/outlet roosters are blocked or the unit has been placed too close
to a wall. If the overheating protection is activated and the unit switches off, the unit
will start to ventilate to get rid of the extra heat. In this case, the display does not
change. Once the unit has cooled down, it will return to its previous setting. We
advise you to switch the unit off using the remote control and to give it enough time
to cool down. Once you have removed the cause of the overheating, you can use the
unit again as normal. If you cannot find the cause of the overheating and the unit
continues to overheat, you should turn the unit off and return it for repair.
Cleaning and Maintenance
Keep the heater clean. Deposits of dust and dirt in the appliance are a common
cause of overheating so these should be removed regularly. Switch off the heater,
remove the plug from the socket and allow the heater to cool down before cleaning
or carrying out maintenance work.
 Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not
use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or chemical
solutions!
 Using a vacuum cleaner, carefully remove any dust and dirt from the grills and
ensure that the air intake and outlet openings are clean. Be careful not to touch
or damage any internal parts during cleaning!
 The heater contains no other parts which need maintenance.
 At the end of the season, store the cleaned heater in the original packaging if
possible. Store upright in a cool, dry and dust-free place.
button again to turn the open window detection off. The icon
43

Publicité

loading

Ce manuel est également adapté pour:

Wall designheat 2000r