EUROM 342192 Manuel D'utilisation page 41

and you can use the plus and minus buttons to set the number of minutes, from
00 to 59.
Press SET again and the display will show
to set the day: Monday = d1, Tuesday = d2, etc.
Finally, press
was in before you set the day and time. Press SET to check the day and time.
Set the temperature
Make sure the unit is switched on then press the plus or minus

button; the standard setting is "23". Press the plus or minus
button until you have reached the required temperature
(between 10°C and 35°C). Press OK to confirm the setting. The
display shows the set temperature and the power, for example:
If you have set the temperature, the unit selects the power

required: full power if it needs to heat the room by more than
2 °C and low power if it needs to heat the room by less than
2 °C. Once the unit has reached the set temperature, the
heating element is switched off but the ventilator remains
switched on for another 30 minutes. This circulates the air in
the room so that the unit can sense whether the room is cooling
down. The unit returns to standby after 30 minutes. The unit
switches on again if the room cools down to 2 °C below the set
temperature.
To turn the thermostat off, press the function button

low or full power. The unit will now work continuously. You no longer see the
temperature on the display, which shows Fig. B or Fig. C. If the unit has been
running continuously for 12 hours, it will switch off automatically, cool down and
return to standby.
Set the weekly programme
To set a weekly programme, you first need to set the date and time.
1. Make sure that the unit is in standby mode (S) (use the main switch).
2. Switch the unit on using the on/off button
3. Press ; a "P" now appears in the top left of the display, which shows the
weekly programme screen (see Fig. D).
to confirm the settings. The display will return to the mode it
; use the plus and minus buttons
.
41
and select heating on