Refco 4688098 Mode D'emploi page 27

REFMATE operating instructions
It takes a long time to
start the device
Date display is always
01.01.2018 when
switched on
9 Guarantee
Your new, state-of-the-art REFMATE has been developed in
accordance with the latest findings in occupational physiology and
ergonomics. REFCO Manufacturing Ltd has been certified according
to DIN EN ISO 9001:2008. Regular quality control checks as well as
an accurate manufacturing process guarantee reliable functionality
and are the basis for the REFCO guarantee, in accordance with the
General Terms and Conditions of Sale and Delivery applicable on the
day of delivery. Excluded from the guarantee are damages caused
by obvious maltreatment and wear and tear.
10 Return and disposal
The REFMATE manifold has been developed for
long-term use. Attention was paid to energy
saving and environmental compatibility at the
material procurement and production stages.
REFCO Manufacturing Ltd feels responsible for its
products throughout their entire lifespan and has
therefore been certified in accordance with
DIN EN ISO 14001:2004. When decommissioning
the device, the user should observe their
country's applicable disposal regulations. The housing is made of
ABS and TPE, the pressure-bearing metals are aluminium and brass.
The plastic case is made of PE.
Delete the firmware and new
refrigerant from SD card
Button battery (CR1220) needs
to be replaced. Contact your
distributor.
English
25