Refco 4688098 Mode D'emploi page 20

English
18
REFMATE operating instructions
Connections
See the tab for the
available wireless
connections.
Under "Enable" you can
activate the connection.
Use to search for
connections and connect
automatically.
To connect to Wireless
Temperature Clamps, choose
in the Clamps the Clamp
names T1 for LP and T2 for
HP.
Once connected, devices are
stored and automatically
connected when the wireless
function is switched on.
The number of connected
devices is shown at the top
left of the display. An
additional battery indicator
will appear if the wireless
temperature clamp requires a
battery change.
Meaning of the colour display:
Green: Device connected
Yellow: Wireless clamp
connected and temperature
sensor plugged in.
The plugged-in sensor has
priority and is displayed.
Red: Stored device not
connected.