Refco 4688098 Mode D'emploi page 11

REFMATE operating instructions
Important notice
Guarantee date
is set within 5
minutes
Remove AA
batteries from
REFMATE after
use
Leave SD card
in the REFMATE
5 Transport, packaging and storage
5.1 Transport
The digital manifold comes with a plastic case to protect the parts.
The plastic case protects against vibrations during transport and
handling. Always use the plastic case to protect the manifold and
accessories and secure it to the cargo area during transport. The
storage conditions must also be maintained during transport.
5.2 Packaging
The plastic case is made of polyethylene and protects the digital
manifold from drop damage. It also has room for accessories, which
comprise the temperature sensors included in the delivery as well as
the temperature clamps, wireless temperature clamps and a vacuum
sensor.
5.3 Storage
The storage temperatures must be maintained and the packaging
must be closed.
A one-off extension of the guarantee from the
date of initial operation is granted. This date is
set the first time the unit is used for more than 5
minutes. This can also be done for presentation
purposes at the point of sale and cannot be
corrected afterwards!
The leakage of chemicals from batteries will
destroy the REFMATE. If the device is
not going to be used for a longer
period of time, the AA batteries must
be removed from the REFMATE. The
leakage of chemicals is not covered
by the guarantee.
We recommend leaving the SD card in the
REFMATE to prevent the loss of the card!
English
9