Belkin Bitronics DualBus Guide De L'utilisateur page 24

P73043/F1U127uKIT univ/man.qxd 4/28/00 1:58 PM Page 20
Windows 95 / 98 and NT
® ®
(continued)
All you have to do is pick your printer, and the software does everything else.
But remember, ALL THE SETTINGS MUST BE CORRECT, otherwise you may
print garbage out of the wrong printer!
Below, the user has chosen the LaserJet printer. Here, this printer is
™
connected to Port A of the AutoSwitch. When the print job is sent, the
Bitronics software tells the Bitronics switch to switch to Port A, then lets the
print job go through to the LaserJet ™ .
20