Belkin Bitronics DualBus Guide De L'utilisateur page 20

P73043/F1U127uKIT univ/man.qxd 4/28/00 1:58 PM Page 16
Windows 95 / 98 and NT
® ®
(continued)
8. Change printer port from LPT1 to AutoSwitch port:
If one or both of the devices being shared is a printer, you must follow the
procedure below to reconfigure the port connected to the printer. If both
devices are printers, then this must be done for both printers. If neither
device is a printer, then you can skip this step.
8.1. Click on Start, select Settings, and double-click on Printers.
8.2. Right-click on the printer installed on the Bitronics switch, and click
on Properties:
16