Publicité
Les langues disponibles
Les langues disponibles
• Grease the rotary blade's gear
wheel with a little ritter mainte-
nance grease (alternatively with a
little Vaseline).
• Fit the rotary blade back into
the appliance.
Cleaning the drawer
• Remove the left-over holder (6)
and the slice carriage (5).
• Make sure that the slice thick-
ness adjustment knob (11a) is
set to position "0". Otherwise, the
food slicer cannot be folded down
for safety reasons.
M
Use one hand to hold the
appliance at the stop plate (9)
and the other hand to press the
release button (10).
• Fold down the food slicer.
Remove the food slicer from the
drawer:
N
Push the slide bar lock (16a)
in the direction of the arrow.
O
Snap the lock clip (16)
upwards.
•
Slide the food slicer in the
direction of the arrow.
• Lift the food slicer out of the
drawer.
• Clean the drawer according to
the manufacturer's specifications.
Replace the food slicer in the
drawer:
U
Position the food slicer over
the two clamping fixtures in the
drawer.
V
Slide the food slicer towards
the front of the drawer until it
locks into place on the two clamp-
ing fixtures.
W
X
/
Press down on the lock
clip until it snaps into place.
• Plug the cable back into the
socket.
MAINTENANCE
Your food slicer is maintenance-
free. However, we recommend
that you occasionally apply a little
extra ritter maintenance grease
or Vaseline to the rails of the slice
carriage to keep them lubricated
and ensure that the carriage
continues to move easily.
STORAGE
• Remove the left-over holder (6)
and the slice carriage (5).
• Fold down the finger protec-
tor (5a).
• Make sure that the slice thick-
ness adjustment knob (11a) is
set to position "0". Otherwise, the
food slicer cannot be folded down
for safety reasons.
M
Use one hand to hold the
appliance at the stop plate (9)
and the other hand to press the
release button (10).
• Fold down the food slicer.
P
Hold the food slicer by the
lifting bar (4) and pull the release
lever (12). Lower the food slicer
into the drawer.
If the drawer is sufficiently deep,
the slice tray (13) can be stored
on top of the appliance.
DISPOSAL OF WASTE
ELECTRICAL AND
ELECTRONIC EQUIPMENT
This symbol indicates
that this product must not
be disposed of with
unsorted municipal
waste. There is a separate (free)
system for the collection and
return of waste electrical and
electronic equipment. For more
information, please contact your
local authority or the shop where
you purchased the product. By
ensuring that this product is
disposed of correctly, you will
help prevent potential negative
consequences for the environ-
ment and human health and
contribute to the conservation of
natural resources.
REACH DIRECTIVE
See www.ritterwerk.de
SPECIAL ACCESSORIES
A special, non-toothed rotary
blade is also available for use
with sliced meat, sausage and
ham.
The original ritter maintenance
grease is available for delivery
for maintaining (regreasing) the
food slicer.
SERVICE, REPAIRS AND
SPARE PARTS
Please contact your local after-
sales service for all service,
repairs and spare parts matters!
See www.ritterwerk.de
TECHNICAL DATA
The appliance complies with the
CE specifications.
Mains voltage/power consump-
tion: Refer to the type label on the
underside of the appliance.
Slice thickness:
0 mm to approx. 14 mm
WARRANTY
This ritter appliance comes with
a two-year manufacturer's war-
ranty, starting with the date of
purchase and in accordance with
the EU warranty directives. Your
legal warranty claims according
to § 437 ff. BGB (German Civil
Code) remain unaffected by this
regulation. The manufacturer
warranty applies to all devices
sold within the European Union.
For details of the warranty condi-
tions, see www.ritterwerk.de/
warranty. In the event of a war-
ranty claim or for servicing, the
appliance must always be sent to
the appropriate national customer
service centre.
English
13
Publicité
