Entering Phone Numbers In The Phone Book; Entering Text - switel DC40 Mode D'emploi

8 Phone Book
The phone book can store 50 phone numbers, each with the associated name. Each phone num-
ber can comprise a maximum of 20 digits and each name a maximum of 12 letters.
8.1

Entering phone numbers in the phone book

Refer to Section 7.1
If the name already exists in the phone book, an acoustic signal is issued and "Add"
appears in the display again. You have to enter another name.
The corresponding melody rings when a call is received from the caller entered. This
assignment only functions when your telephone connection and that of the caller imple-
ment the caller number display function (CLIP).
8.1.1 Notes on storing
Always enter the area access code with the phone numbers so that the telephone can
also assign incoming local calls to a phone book entry.
If the memory capacity of 50 phone numbers is reached, the mes-
sage MEMORY FULL appears in the display. Phone book entries will then have to be de-
leted in order create space.

8.1.2 Entering text

The digit keys are also labelled with letters. Pressing the respective key the necessary number
of times enables capital letters and digits to be entered.
Example: To enter the name Peter".
Press 1 x button /, 2 x button §, 1 x button (, 2 x button § and 3 x button /.
Further notes on entering text:
Press 1
—
yz
To enter the same letter twice, press the relevant button until the letter appears then wait till the
cursor automatically skips one position forward.
8.2 Changing phone book entries
Refer to Section 7.1
To select an entry directly, press the corresponding button to enter the first letter of the
name required. To select the name Peter" directly, for example, press / once.
8.3 Deleting phone book entries
Refer to Section 7.1
The deletion process is cancelled by pressing the — button.
8.4 Dialling a phone number from the phone book
Refer to Section 5.8
− Phone Book −
once: Space
Press twice: Hyphen
Deletes the last entry
Move the cursor
89