Télécharger Imprimer la page

Becker CentronicPLUS SC911 PLUS Notice De Montage Et D'utilisation page 20

Publicité

Les langues disponibles

Les langues disponibles

Explanation of displays and buttons
Function/
control button
Programming
button
Indicator lamp on
start-up
Indicator lamp dur-
ing operation
20 - en
Rain sensor (blue)
Sun sensor
Wind sensor
Temperature sensor
Lights up green for
1–6 seconds
Briefly lights up yel-
low
Briefly lights up
green
Colour change
Permanently lights
up red
Permanently lights
up green
Permanently lights
up blue
Permanently lights
up yellow
Lights up green 3
times
Indicator lamp
The sensor has started up and is still
booting up.
The sensor is sending sensor data to its
receiver.
The sensor is sending the current drive
command to its receiver.
The sensor is performing a search for the
programming process.
No receiver was found in programming
mode.
A receiver was paired with the sensor in
programming mode.
A receiver was found in the same network
in programming mode but has not yet
been paired with the sensor.
A receiver was found in a different net-
work in programming mode.
The sensor has been identified by another
network participant.

Publicité

loading