Mounting - Theben HTS ECO-IR 180EIB-AC Notice D'utilisation

. Mounting

When mounting the detector on a suspended ceiling, the QuickFix moun-
ting frame enables you an entirely flush mounting into the ceiling (ECO-IR
360EIB-AC and ECO-IR DUAL-EIB).
.1 Positioning The Bus Interfaces (BCU)
● When mounting the detector, make sure the bus coupling unit is
correctly positioned. When using a ceiling-mounted ECO-IR DUAL-EIB
„A Window" must face towards the window side (according to the Lux
value for LuxA or LuxB).
● When using a wall-mounted ECO-IR 180EIB-AC, the labelling must be
legible (plug on top).
.2 Dismantling / Post-adjustment
● Should you need to dismantle the sensor
unit or wish to vary the setting later on,
open the safety lock on the detector be-
fore removing it by pulling out both side
latches with a Screwdriver.
GB
3