Publicité
Les langues disponibles
Les langues disponibles
5. Acquiring CBCT Images
5.3
X-ray Exposure
1.
Get out of the X-ray room and close the door.
2.
Press and hold down the Exposure Switch until image acquisition is completed.
68
▪
If an emergency occurs during image acquisition, release the
Exposure Switch to cease X-ray emission.
▪
The operator shall observe the X-ray safety regulations applicable
to his/her area at all times during the operation of this equipment.
▪
The operator must keep vocal/visual contact with the patient at all
times during image acquisition process.
▪
Do not operate the PC during exposure. Doing so may cause the
system to malfunction.
▪
Let the patient close the eyes during the operation.
▪
To acquire optimized images, instruct the patient to hold his/her
breath and not to swallow. Also don't let the patient move until the
Temple Supports are open.
The operator must keep vocal/visual contact with the patient at all
times during image acquisition.
Yellow: X-ray On
The image appears on the screen.
Smart Plus User Manual
Publicité
