Using The Sleep Timer - Yamaha RX-397 Mode D'emploi

PLAYING AND RECORDING

Using the sleep timer

Use this feature to automatically set this unit to the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source. The sleep timer also
automatically turns off any external components
connected to the AC OUTLET(S).
SLEEP
3
CD/DVD
1
MD
PRESET
A/B/C/D/E
Note
The sleep timer can only be set with the remote control.
1
Press one of the input selector buttons on
the remote control to select an input source.
SLEEP
CD/DVD
MD
2
Start playback on the selected input source.
3
Press SLEEP repeatedly to set the amount of
time before this unit is set to the standby
mode.
Each time you press SLEEP, the front panel display
changes as shown below.
SLEEP
SLEEP 120 min
SLEEP OFF SLEEP 30 min
The SLEEP indicator flashes while switching the
amount of time for the sleep timer.
18
POWER
STANDBY
PHONO TUNER
SPEAKERS
TAPE AUX
A
B
+
u
VOLUME
–
d
MUTE
POWER
STANDBY
PHONO TUNER
SPEAKERS
TAPE AUX
A
B
SLEEP 90 min
SLEEP 60 min
SLEEP
4
Press SLEEP repeatedly so that SLEEP OFF
appears in the front panel display.
SLEEP
After a few seconds, SLEEP OFF disappears from the
front panel display, and the SLEEP indicator turns
off.
y
The sleep timer setting can also be canceled by pressing
STANDBY on the remote control (or STANDBY/ON on the front
panel) to set this unit to the standby mode.