Publicité
Les langues disponibles
Les langues disponibles
Factory Defaults
SR315 Binding SLT Protocol
Connect a fully charged battery
pack to the ESC.
SR315 Binding DSMR Protocol
Connect a fully charged battery
pack to the ESC.
OM
Power on the ESC. press the
bind button three times quickly
(within 1.5 seconds of the first
button press).
HOLD
Press and hold the bind button
on the receiver.
Power on the receiver. The
orange LED flashes, indicating
the receiver is in bind mode.
Release the bind button after
the orange LED illuminates.
www.modellmarkt24.ch
x3
Set the trims and control positions at the desired failsafe
settings, and power ON the SLT3 transmitter.
Put your DSMR transmitter (not included) in bind mode.
The bind process is complete when the orange LED on
the receiver remains lit.
21
DSMR Radio (not included)
WWW.ARRMA-RC.COM
Publicité
