Publicité
Les langues disponibles
Les langues disponibles
Battery Modes
Temperature Protection
If the ESC temperature exceeds 125 degrees Celsius/257 degrees Fahrenheit, the ESC will
enter temperature protection mode and the green status LED will blink. Once the ESC has
cooled down it will resume normal operation after it has been turned off and back on again.
ESC Tuning Options
The brushless ESC is setup for use straight from the factory, if you want to alter the settings for your
track or driving style please see the table and steps below:
Variable
Low Voltage Cut-Off Threshold
1
2
Punch Setting
3
Brake Strength
4
Running Mode
5
Motor Rotation
6
BEC Voltage
To alter ESC settings
Connect battery
to the esc and
Power on the
switch on the
transmitter.
The number of
times the green
Press and
led flashes equals
release the
the programming
set button.
Turn off the esc to quit programming mode or to enter
another programming item.
Factory Reset
To reset the ESC to factory default settings, connect a battery, turn the transmitter on and then turn
the car on. Press and hold the set button for 5 seconds and release. The Red and Green lights will
flash simultaneously to show you have reset. Switch the ESC off and factory reset is complete.
www.modellmarkt24.ch
Setting > 1
LIPO
Level 1
25%
Fwd/Brk/Rev
Fwd/Brk
Normal
Reverse
(CCW)
6.0v
To reset all programming items, press and
hold the set button for five seconds.
Hold set
key for one
second.
esc.
Hold the set button
for three seconds
to select the
programming item.
item number.
2
3
4
NIMH
Level 2
Level 3
Level 4
Level 5
37.5%
50%
62.5%
(CW)
7.4v
Green led
flashes.
The number of times the
red led flashes equals the
option number (within the
programming item).
Press and hold the set button
for three seconds to save the
selected option.
18
5
6
7
75%
87.5%
100%
Release the set
button to enter
programming.
WWW.ARRMA-RC.COM
Publicité
