Getting Started; Resetting The Unit; Demo Mode; Setting The Clock And The Calendar - Sony CDX-NC9950 Mode D'emploi

Getting Started

Resetting the unit

Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Press the reset button with a pointed object, such
as a ballpoint pen.
After pressing the reset button, the start-up image
appears and the demonstration starts
automatically.
Note
Pressing the reset button will erase some stored
contents such as the clock/calendar settings in the
memory of the unit.
Tip
You can change the start-up image. For details, see
"Selecting the start-up image" on page 24.

Demo mode

When the unit is turned off, the clock is
displayed first, then demonstration (Demo) mode
starts the demonstration display.
Demo mode contains 2 patterns. For details, see
"Demo" in "Setup menu" on page 32.
"Demo ON" (default setting): Wallpaper, Movie,
Space Producer and Navigation Control modes
step repeatedly through.
"Demo OFF": Wallpaper and Movie modes step
repeatedly through.
Tip
During the demonstration display, you can adjust the
brightness of the display in 11 steps (from 0 to 10) by
rotating the R dial.
6
Setting the clock and the
calendar

— Clock

The clock uses a 24-hour digital indication.
1
2
3
4
Reset button
5
6
Note
If your car has no ACC position, turn on the unit first,
then set the clock and the calendar.
Tips
• You can set the year from 2004 to 2099.
• You can set the clock automatically with the RDS
feature (page 20).
Press (MENU).
Press < or , repeatedly to select
"Setup," then press (ENTER).
Press < or , repeatedly to select
"Clock," then press (ENTER).
Set the date and time.
1 Press M or m repeatedly to select
the day, then press (ENTER).
2 Follow the step 1 to set the month,
the year, hour and minute.
The confirmation display appears after
setting the minute, then press (ENTER).
Press < or , to select "YES," then
press (ENTER).
"Complete" appears, and the display returns
to the main menu.
Press (MENU).
The display returns to the normal display.