Error Displays/Message - Sony CDX-NC9950 Mode D'emploi

Image storing
Images cannot be stored.
The number of images stored in this unit has
reached 100.
t Delete unnecessary images, and store
again.
Buttons and dials do not work while storing
images.
The unit is in process for storing images. Only
disc eject, sound attenuate and volume control
are available during this process.
t Wait a moment until storing images is
complete.
The Video mode cannot be selected.
• A video unit is not connected to the VIDEO
IN terminal of this unit, or video signals are
not being output from the connected video
unit.
• The colour system of this unit does not
conform to the video unit connected.
t Set the colour system to PAL or NTSC
according to the connected video unit
(page 32).
• Video signals from the video unit are not
compatible with PAL or NTSC.
• The parking brake is not applied.

Error displays/Message

Error displays
(For this unit and optional CD/MD changers)
The following messages will be displayed, and
an alarm will be heard.
Disc Blank
No tracks have been recorded on an MD.
t Play an MD with recorded tracks on it.
Disc Error
• A CD is dirty or inserted upside down.
t Clean or insert the CD correctly.
• A CD/MD cannot play because of some
problem.
t Insert another CD/MD.
Disc NO Music
A CD which is not a music file is inserted.
t Insert a music CD.
Failure
The connection of speakers/amplifiers is
incorrect.
t See the installation guide manual of this
model to check the connection.
Load
The changer is loading the disc.
t Wait until loading is complete.
40
High Temp
The ambient temperature is more than 50°C.
t Wait until the temperature goes down
below 50°C.
NO AF
There is no alternative frequency for the
current station.
t Press < or , while the station name is
flashing. The unit starts searching for
another frequency with the same PI
(Programme Identification) data ("PI Seek"
appears).
NO Disc
No disc is inserted in the CD/MD changer.
t Insert discs in the CD/MD changer.
NO Disc Name
A disc name is not written in the track.
NO Magazine
The disc magazine is not inserted in the CD
changer.
t Insert the magazine in the CD changer.
NO TP
The unit will continue searching for available
TP stations.
Not Ready
The lid of the MD changer is open or the MDs
are not inserted properly.
t Close the lid or insert the MDs properly.
Offset
There may be an internal malfunction.
t Check the connection. If the error
indication remains on in the display,
consult your nearest Sony dealer.
Push Reset
• The unit cannot be operated because of some
problem.
• The CD/MD changer cannot be operated
because of some problem.
t Press the reset button on the unit.
Read
The unit is reading all track and group
information on the disc.
t Wait until reading is complete and
playback starts automatically. Depending
on the disc structure, it may take more than
a minute.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
Message
Local Seek up/Local Seek down
The Local seek mode is on during automatic
tuning (page 17).