Valor LT1 Serie Guide D'installation page 3

5. Once wall fi nishing is complete, place cover plate in
the bottom of the opening. It will rest on the sup-
ports at the bottom corners of the opening. There
are no screws inserted in this step.
Note: Each end of the plate has a rounded notch
opening to insert the hinge pin of the side doors.
6. Identify left hand door and its orientation according
to the images below.
Front Rear
Notch in
cover plate
Cover plate
TOP of door:
Longer pin
BOTTOM of door:
Shorter pin
7. Insert the left hand door top hinge pin in the hole at
the top of the CIK frame (a), then the bottom hinge
in the hole of the cover panel (b). Turn the door in
toward the back of the fi replace (c).
Top pin
a
8. Repeat for right hand door.
9. Place the magnetic barrier screen into the CIK frame
opening with the tabs at the bottom.
Assembly of the kit is complete.
b
c
Bottom pin
3