Télécharger Imprimer la page

Angelcare AC605-2PU Manuel Du Propriétaire page 9

Masquer les pouces Voir aussi pour AC605-2PU:

Publicité

Les langues disponibles

Les langues disponibles

TO ADJUST THE SENSOR PAD SENSITIVITY LEVEL:
Turn the Nursery Unit sensitivity dial from less
sensitive (0) to very sensitive (5).
NOTE:
If you are experiencing false alarms,
adjust the Sensitivity level.
For better result, start by half level
increases or decreases.
IMPORTANT
• The Sensor Pad is not designed for use with adults, children or infants older
than 24 months.
• Once you are finished using the Sensor Pad, please remove it from the baby's
crib and store it away.
5.2 - OUT OF RANGE
Your monitor has an Out-of-Range function that advises you when your two units
are not communicating. Out-of-Range situations can be caused by distance or by
physical interferences.
RANGE:
Open field (Open area without obstructions): up to 820 feet (250 meters).
TO ACTIVATE THIS FUNCTION:
Press and hold the Nursery Unit Night
Light button for 2 seconds.
The Out-of-Range Indicator (orange)
on both units will light up to display
function's activation.
OUT-OF-RANGE ALARM
• Alarm activates when your two units are not communicating.
• The Parent Unit will emit a double beep every 8 seconds.
IMPORTANT
If the Out-of-Range function is activated and you turn the Nursery Unit OFF
the Out-of-Range Alarm will sound. Turn the Nursery Unit ON again to reconnect both
units. To reactivate the Out-of-Range function, follow steps above. If you turn the
Parent Unit OFF, the Out-of-Range function will be deactivated but the orange light will
stay lit on the Nursery Unit. To reactivate this function on the Nursery Unit follow steps
above.
16
TO STOP THE OUT-OF-RANGE ALARM:
Turn the Parent
Unit OFF
5.3 - SOUND
TO TEST SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
IMPORTANT
To avoid feedback (whistling),
keep both units at least 10 feet
(3 meters) apart.
TO ADJUST SOUND LEVEL:
Slide Parent Unit Volume/Power button
upward or downward.
5.4 - NIGHT LIGHT
Press the Night Light button on the Nursery Unit
to turn it ON or OFF.
NOTE:
If you press Night Light button for more
than 2 seconds Out-of-Range function
automatically activates.
Turn the Nursery
OR
Unit ON
IF YOU HEAR NO SOUND:
• Check that both units are switched ON.
• Check that both units are plugged into
functioning electrical outlets.
• Check the batteries in both units
(replace or recharge them as necessary
per unit).
• Bring the Parent Unit closer to the
Nursery Unit.
E
N
17

Publicité

loading