Publicité
Les langues disponibles
Les langues disponibles
2.5 InTouch
The extraction hood has the InTouch function. If you
have an induction hob from Novy with InTouch, you can
operate the extraction hood from the hob. There is also
the option that the extraction hood can be operated with
a remote control.
Programming InTouch on the induction plate
The remote control must first work with the hood. If ne-
cessary, the remote control code can be changed, as
described in Section 2.5
− Connect the plate to the mains supply.
− Touch simultaneously the keys
plate until you hear a beep signal (prox. 7 sec.).
− The cooker plate now searches automatically for the
hood code.
− Wait until the cooker hood illumination begins to flashing
OR you hear a "click" sound when you have an extractor
hood without lighting (Be patient, this can betake a while).
− Does the light blink or you hear the "click" sound; press
immediately on any InTouch key or
on the induction hob.
− You will hear a "beep" signal to indicate the link between
the two devices.
Now you can operate the hood with the keys on the
induction plate.
You can find more information about using the InTouch
functions in the InTouch manual for the hob or remote control.
Turning the InTouch function on and off
The InTouch function is on by default. Turning
off the InTouch function on the cooker hood
results in the connection between cooker hood
and Novy induction hob with InTouch and/ or
remote control is also disabled.
To switch the InTouch function off press the
keys at the same time for 3 seconds and the 2nd and 4th
LEDs flash 3 times to confirm. (The appliance must be
switched off).
The function can be switched on by pressing the
keys at the same time for 3 seconds.
3
The 2nd and 3rd LEDs flash 3 times to confirm (the appli-
ance must be switched off).
and
on the induction
or
or
or
1
and
2
1
and
– 37 –
3 CLEANING AND MAINTENANCE
Follow all instructions as described in the Con-
ditions for Safety and Use section.
Follow the cleaning instructions below for a
longer working life and optimal operation of the
appliance.
The bottom panel, grease filter and recircula-
tion filter can fall out when you are handling
them. This can result in damage. Make sure you
hold the bottom panel and the filter(s) securely
at all times when handling them.
WARNING! Risk of injury! Open and close the
bottom panel slowly. Use a stable stepladder
and pay attention to stability. Do not step on the
hob or the worktop surface.
3.1 General maintenance
Allow the lighting to cool down sufficiently be-
fore you start cleaning the extractor hood.
Never use aggressive, abrasive or chlorinated
products.
Do not use a high pressure or steam cleaner.
Stainless steel
Clean with a cleansing tissue with mild cleaning agent
then dry with a soft cloth. Maintenance of the stainless
steel can be performed with the Novy cleaner (906060).
Coated parts of the extractor hood
The extractor hood can be cleaned with a damp cleansing
tissue and a mild cleaning agent.
Glass
Glass parts of the extractor hood can be cleaned with
a soft cloth and a glass cleaner.
3.2 Removing the bottom panel
If the bottom panel is to be removed from the cooker hood
for cleaning, proceed as follows:
− Grasp the bottom panel at the left and right ends.
− Slowly tilt the bottom panel downwards and continue
to hold it in place.
− As soon as the bottom panel is at a 90º angle downwards,
the bottom panel can be slid to the right to remove it
from the hinges. Here you will feel some resistance. Do
this with caution to prevent damage to the cooker hood.
Make sure you hold the bottom panel securely at all times.
− The bottom panel can then be cleaned by hand. The
Publicité
