Philips AC3039 Mode D'emploi page 7

3 Getting started
Installing.the.filter
Remove all packaging of the filter before first use.
Note: Make sure the air purifier is unplugged from the electrical outlet before installing the filter.
1
Pull the back cover and remove it from the appliance (fig
2 Pull the filter from the appliance (fig
3
Remove all packaging materials of the air purification filter (fig
4
Put the filter back into the appliance (fig
5
Reattach the back cover (fig
Understanding.Wi-Fi.indicator
Wi-Fi.icon.status
Blink in orange
Stable in orange
Blink in white
Stable in white
Off
Wi-Fi.connection
Note:
• Corporate/Enterprise networks (e.g. certificates, network profiles) are not supported. We
recommend setting up the Philips Air Purifiers on a dedicated network created for IoT devices or
WPA2-Personal networks.
• Configuration details are provided in the Clean Home+ app (e.g. Mac address) to help set-up on
managed networks.
Setting.up.the.Wi-Fi.connection.for.the.first.time.
1 Download and install the Philips "Clean Home+" app from the App Store or
Google Play�
2
Put the plug of the air purifier in the power socket and touch
purifier.
The Wi-Fi indicator
»
3
Make sure that your smartphone or tablet is successfully connected to your Wi-Fi network.
4 Launch the "Clean Home+" app and click on "Connect a New Device" or press the "+" button on
the top of the screen. Follow the onscreen instructions to connect the air purifier to your network.
Note:
• Enterprise/Additional webpage authentication networks are not supported.
• This instruction is only valid when the air purifier is being set up for the first time. If the network has
changed or the setup needs to be performed again, see Chapter "Reset the Wi-Fi connection" on
page 6�
).
d
).
f
).
g
Wi-Fi.connection.status
Connecting to the smartphone
Connected to the smartphone
Connecting to the server
Connected to the server
Wi-Fi function disabled
blinks orange for the first time.
).
c
).
e
to turn on the air
EN
5