Shock Absorber Position; Cleaning And Maintenance - Reely 1:10 EP Electro Buggy Buzz 2WD Mode D'emploi

12.3 Shock absorber position

13. Cleaning and maintenance

Prerequisites:
• The drive battery is disconnected from the model.
• The transmitter is turned off.
• The model has cooled down to room temperature.
Important:
• Do not use cleaning sprays or conventional household cleaning chemicals. These may damage the
electronic components and discolour the plastic parts or chassis.
Do the following:
• Remove all dust and dirt (e.g. using a clean long-haired brush and a vacuum cleaner).
• Compressed air aerosols can also help to remove dirt.
28
• Tuning options:
- Adjustable front axle: Yes
- Adjustable rear axle: Yes
• The shock absorbers can be mounted on the lower
suspension arms in various positions that will af-
fect the ride height, camber, and spring loading
angle.
• Make sure the position is the same on both sides.