Publicité
Les langues disponibles
Les langues disponibles
USER'S MANUAL.
PROMAX-10
The options available on the Configuration
menu in the LEVEL measurement mode are next:
Freq. Mode: It allows you to change the
measurement signal among ANL
(Analogue), DIG (digital) and LEV
(Power Level).
Freq. Step: It allows you to change the step of frequency. This is put into
practice when you are using the rotary knob to change frequency.
Audio Mode: There are four options to receive the audio signal: LEVEL, AM, FM,
OFF.
In LEVEL mode, the instrument beeps depending on the power
input.
In AM mode, you can listen to AM (Amplitude Modulation) radio
signals.
In FM mode, you can listen to FM (Frequency Modulation) radio
signals.
In OFF mode, the loudspeakers are off.
The options available on the Configuration menu in the ANALOGUE
measurement mode are next:
Freq. Mode: It
measurement signal among ANL
(Analogue), DIG (digital) and LEV
(Power Level).
Freq. Step: It allows you to change the step of
frequency. This is put into practice
when you are using the rotary
knob to change frequency.
Audio Mode: There are four options to receive the audio signal: LEVEL, AM, FM,
OFF.
In LEVEL mode, the instrument beeps depending on the power
input.
In AM mode, you can listen to AM (Amplitude Modulation) radio
signals.
In FM mode, you can listen to FM (Frequency Modulation) radio
signals.
In OFF mode, the loudspeakers are off.
07/2011
SE
allows
you
to
change
CONFIG LEVEL:
FREQ. MODE
FREQ STEP
0.10MHz
AUDIO MODE
Figure 33.- Config Level.
the
AN. FR CONFIG:1/ 2
FREQ MODE
FREQ STEP
AUDIO MODE
Figure 34.- ANL. FR CONFIG. 1/2.
LEV
FM
ANL
0.10 MHz
FM
Page 33
Publicité
