Promax -10 SE Manuel D'utilisation page 102

To check the measurements stored in a specific logger select the VIEW option:
The first line shows the channel plan (CCIR
in the example), the audio carrier offset (5.50 MHz),
the audio demodulation (FM) and the units of
measurement (dBµV). The second line shows the
logger number (53 in the attached figure) and the
headings of the measurements (V, V/A and C/N).
The measurements taken are shown in the
following format: first column shows the channel,
the D indication on its right means it has been
defined as digital (see Edit Channel Plan function at section 4.2.1 Global configuration
menu), the second column shows the level (analogue channels) or the channel power
(digital channels), the third the V/A ratio (analogue channels) an the fourth the C/N ratio
(analogue channels) or MER (digital channels). Turning the rotary selector [9] you can
see the rest of channels.
The time and date when measurements were taken appear at the end of the list
of measurements, in the following order: hour:minute:second and month:day:year. To
return to the initial menu of the LOGGER FUNCTION press LOGGER key.
To print the stored measurement select the PRINT field, previously consult
section 4.3 Connecting to a computer or a printer.
Page 42
Figure 52.- Example of print.
USER'S MANUAL. PROMAX-10
Figure 51.- Viewing a logger.
SE
07/2011