Publicité
Les langues disponibles
Les langues disponibles
Ensuring the mounting location of the
unit
Before installing the unit, consult the installer for
details on the installation of the unit and the
display.
• Make sure that the distance from the front surface
(reference surface) of the mounted unit to the
surface of your car's center cluster is within 22 mm
(
7
/
in). If exceeded, the unit cannot be installed
8
properly.
Front surface of the unit
(reference surface)
22 mm (
7
/
in)
8
• Adjust the angle of the display before installing to
the unit.
(Installed angle) changes depending on the mounting
locations of the pre-installed screws.
Screw hole positions
(for securing the display and the unit)
(Display position) changes depending on the mounting
locations of the pre-installed screws.
(Installed angle) (Display position)
0° - 20°
56 mm - 76 mm (2
20° - 30°
55 mm - 75 mm (2
30° - 40°
54 mm - 74 mm (2
10
EN
Center cluster panel of
your car
13
63
/
in - 2
/
in)
64
64
11
/
64
in - 2
61
/
in)
64
1
/
in - 2
29
/
in)
8
32
• For your safety, adjust the mounting location of
the unit so that it does not interfere with driving
operations such as button (switch) or shift lever
operations.
Hidden area even when the display is
slid up or down
Position of the unit (reference position)
60 mm (2
in) 112 mm (4
3
/
8
25 mm (1 in)
in) 60 mm (2
1
/
3
/
in)
2
8
Publicité
