Publicité
Les langues disponibles
Les langues disponibles
Perform the following test to check for damage to the ceramic
plates inside the stop unit.
Failure to correctly perform this test can result in possible water
damage.
Turn on the water supplies. Grasp the stop unit
and turn it.
If there is a leak around the cartridge, turn the
supplies off, and remove the cartridge. Confirm
that the sealing gasket from the flushing plug was
removed.
Reinstall the cartridge. Turn the stop unit.
If the unit continues to leak, contact
Hansgrohe Customer Service for a re-
placement cartridge.
Solaris only (oval escutcheon): Snap the
white Duotec spacers onto the carrier plate.
Install two Duotec strips on the spacers. Install the
two remaining strips on the back of the escutcheon
(trim plate).
All other models (round escutcheon):
Install two Duotec strips directly on the carrier
plate. Install the remaining two strips on the back
of the escutcheon.
English
stop unit
a
b
9
Publicité
