Clearing Paper Jams - Star TSP200-24 Mode D'emploi

5-4. Clearing Paper Jams

1 Turn the power to the printer OFF and open the cover.
2 Move the auto cutter unit in the direction of the arrow until the lock engages
(unnecessary if an auto cutter unit is not installed).
3 Cut some of the paper from the roll just in front of the paper feeder to clear the
paper jam.
4 Using the same procedure described for cleaning the head, push the head-open
lever back and release the set cover to enable the head-open position. See
"Appendix E: Cleaning" for details.
5 Clear away the jammed paper. If the jammed paper cannot be reached, turn the
feed knob and remove the paper.
6 Once the paper jam has been removed, press the top of the set cover and engage
the head-open lever.
Cautions
* If a paper jam should occur in the auto cutter, place a screwdriver into the
opening located on the upper right surface of the auto cutter unit; using the
screwdriver, turn the knob to move the blade and remove the jammed paper.
* Certain parts of the printer, especially the metal fixtures, can cause injuries if
handled improperly. Please be careful when handling the printer.
Auto cutter unit
Opening
Knob
– 16 –