Star TSP200-24 Mode D'emploi page 15

Paper exit
Caution
If the paper is not completely straight when it is inserted into the unit, the paper
will "skew" and the edges will fold. Depending upon the degree of the skew,
the flow of paper can be automatically corrected by pressing the FEED switch.
However, should the paper become extremely skewed, a paper jam may occur.
To clear the jam, pull the head-up lever forward. With the lever in the "head-
up" position, pull out the paper from the paper feeder.
Auto cutter unit
Paper feeder
1) Same as 4-1.
2) Insert the edge of the paper into the
Printer mechanism
5 (Manual loading)
1) Move the auto cutter unit all the way
2) Pull the head-up lever forward into
3) Insert the edge of the paper into the
– 11 –
• Without an auto paper cutter.
paper feeder. If inserted correctly,
the edge of the paper will pass
through the paper exit.
back in the direction indicated by
the arrow until the lock engages
(unnecessary if an auto cutter unit is
not installed).
the "head-up" position. The head-
up lever is shipped from the factory
in the "head-up" position.
See "Chapter 3: Printer Connec-
tion" for details.
paper feeder. Turn the feed knob
(green) until the edge of the paper
passes through the printer mecha-
nism's paper exit.