Refilling The Paper Supply - Star TSP200-24 Mode D'emploi

5-2. Refilling the Paper Supply

1 When the paper sensor detects that
the printer is out of paper, press the
FEED switch until the paper feed-
ing action stops. If the near-end
sensor is operating and there is still
paper on the roll, cut the paper just
in front of the paper feeder and press
the FEED switch until the paper
feeding action stops. See "Chapter
4: Near-end Sensor" for details.
2 Open the cover, pull the head-up
lever forward into the "head-up"
position and pull out the paper.
3 Open the holder lever in the direc-
tion indicated by the arrow and re-
move the core and any left over
paper.
4 See "5-1: Loading Paper" and fol-
low the directions provided to refill
the paper supply.
– 13 –