6 CHANGING THE LOCKING CYLINDER
14
–
Remove pin
–
Take off rocker arm
–
Remove screws
–
Remove the cover with the springs.
Guideline
Ensure that the springs remain in place.
502013-01
–
Remove plug
502014-01
–
Key in vertical position
–
Push engaging plate
–
Remove the locking cylinder.
Guideline
The key must remain in the locking cylinder.
502015-01
Installing the locking cylinder
–
Grease and mount the O-ring
–
Position and insert the locking cylinder as shown in the
figure.
The holding lug of the locking cylinder adapter is
facing downward.
Engaging plate
501999-01
–
Turn the key 90° clockwise
–
Mount plug
502016-01
cp
to the right.
cq
with the spring.
cr
with the washers.
cs
.
G
.
bq
into the locking cylinder.
6
(included).
bq
engages.
H
.
cs
.