Publicité
Les langues disponibles
Les langues disponibles
Opening the top case
–
Move the key 90° to the right
–
Slide the push button to the rear fully, press down and at
the same time, open the cover.
502000-01
Closing the top case
–
Close the cover firmly.
The lock engages audibly.
–
Turn the key back into the locked and secured position
and remove it.
502007-01
Mounting the sliding plate
–
Position rubber bearings
9
des
from the assembly kit (all included) on the back
br
plate
502001-01
–
Position sliding plate
502002-01
–
Mount screws
bl
hers
, and washers
ded) and tighten.
Guideline
Screw, sliding plate
502003-01
H
.
7
, spacers
.
2
(included).
bn
with sliding bushings
bk
from the assembly kit (all inclu-
M8x35
ASSEMBLY 5
G
8
and sliding gui-
bm
, rubber was-
25 Nm
(18.4 lbf ft)
11
Publicité
