KTM 61912927044 Manuel De Montage page 34

5 ASSEMBLY
12
Mounting the top case
–
Turn the key 45° clockwise
The handle pops up automatically.
The securing lever
The top case is released and can be mounted or remo-
ved.
502004-01
–
Position topcase
of the sliding plate and push it forward until it is firmly
seated on the sliding plate.
502005-01
–
Swing in securing lever
–
Push the handle all the way down and turn the key back to
vertical position
Guideline
Make sure that all accessory parts and pieces of luggage
are carefully attached. Regularly check all connections
to ensure that they are fitted tightly.
Info
502006-01
If the securing lever cannot be swung in, the top
case has not yet engaged in the correct position or
the key is not in the correct position.
Taking off the top case
–
Turn the key 45° clockwise
The handle pops up automatically.
The securing lever
The top case is released and can be mounted or remo-
ved.
–
Pull the top case to the rear by the handle and lift it off.
502008-01
I
.
bs
swings out automatically.
1
(included) in the guides (see arrow)
bs
.
G
and remove.
I
.
bs
swings out automatically.