Technical Data - Dimplex DX 410E Instructions De Montage Et D'utilisation

DX 410E - DX 430E
10. Options
10.1 Key lock
This function can be used to lock the operating ele-
ments.
Press and hold the ENTER key and the MODE key
for one second.
The LOCKED key symbol appears in the display.
To unlock, press and hold the ENTER key and the
MODE at the same time again.
NOTE NOTE
No settings can be made if the key lock is activated.
10.2 Advance
In automatic mode, the next time block can be selected
early. The set time block then switches from OFF to ON
or vice versa.
Press and hold the + key for three seconds.
ADVANCE flashes.
Operating display on the left side of the screen
switches from OFF to ON or vice versa.
Activating / deactivating the ADVANCE function
Press the - key. ADVANCE disappears.
www.dimplex.de/en
11. Warranty
This product is supplied with a two-year warranty
according to our terms of guarantee.
12. Note on disposal
Do not dispose of the unit with general
household waste. The device must be taken to
a local waste disposal plant.

13. Technical data

Model reference
Nominal voltage
Degree of protection
Dimensions (W x H x D)
Weight
Heat output
Nominal heat out-
put
Minimum heat
output (indicative)
Maximum contin- P
uous heat output
Auxiliary electricity consumption
At nominal heat
output
At minimum heat
output
In standby mode
Type of control
Electronic room temperature controller with week program and
adaptive control of the heating start.
GDC Group Ltd. Millbrook House,
Grange Drive, Hedge End,
Southampton, SO30 2DF
www.dimplex.co.uk
1810/D
DX 410E
DX 425E
DX 415E
DX 430E
DX 420E
1/N/PE, 230 - 240 V~
IP20
575 x 350 x 124 695 x 350 x 124
mm
4.1 kg
P 1.0 kW
nom
1.5 kW
2.0 kW
P 1.0 kW
min
1.5 kW
2.0 kW
1.0 kW
max, C
1.5 kW
2.0 kW
el 0.0 W
max
el 0.0 W
min
el 0.5 W
SB
Tel.: +44 844 879 3588
Fax.: +44 844 879 3583
aftersales@dimplex.co.uk
English
mm
4.8 kg
2.5 kW
3.0 kW
2.5 kW
3.0 kW
2.5 kW
3.0 kW
0.0 W
0.0 W
0.5 W
EN-6