Technical Data - Dimplex MH 4 NO Instructions De Montage Et D'utilisation

MH - Natural stone heating
If you cannot correct the fault, please contact a spe-
cialist electrical service centre or else the service cen-
tre for Dimplex devices. Please have the E-number
printed on the type plate ready.
7. Cleaning
The device must be switched off and must have
cooled down before cleaning. Set the room thermo-
stat to OFF. Clean the outside of the unit using a soft,
damp cloth and dry it off.
Water is adequate for cleaning. Do not use any scour-
ing powder or other chemicals, as they could damage
the surface.

10. Technical data

Unit type
Nominal voltage
Degree of protection
Dimensions (W x H x D)
Weight
Heat output
Nominal heat output
Minimum heat output (
guide value)
Maximum continuous heat output
Self consumption
With nominal heat output
With minimum heat output
In standby state
Regulator for heat output
External electronic room temperature controllers with week programme and adaptive control of the heating start, as well as other energy
saving functions where applicable.
Glen Dimplex Deutschland GmbH
Am Goldenen Feld 18
D - 95326 Kulmbach
www.dimplex.eu
MH 4
600 x 400 x
70 mm
22 kg
P 0.35 kW
nom
P 0.35 kW
min
P 0.35 kW
max, C
el 0.0 W
max
el 0.0 W
min
el 0.0 W
SB
Tel.: +49 9221 709 700
Fax: +49 9221 709 701
E-mail: elektroheizung@dimplex.de
8. Warranty
This product is supplied with a five-year warranty
according to our terms of guarantee.
With a natural stone heating system, the drawing, col-
our and machining never match completely. Devia-
tions from the brochures and samples are therefore
not a justified reason for complaints or returns. It is
completely natural that hairline cracks may form due
to heating.
These do not have a negative impact on the heat out-
put or the safety of the heating device.
9. Note on disposal
Do not dispose of the unit with general house-
hold waste. The device must be taken to a
local waste disposal plant.
MH 7 MH 9
1/N, 230 V ~
IP66, water-jet proof
1000 x 400 x 1000 x 500 x
70 mm 70 mm
35 kg 40 kg
0.65 kW 0.85 kW
0.65 kW 0.85 kW
0.65 kW 0.85 kW
0.0 W 0.0 W
0.0 W 0.0 W
0.0 W 0.0 W
2111/C
MH 12 MH 15
1000 x 600 x 1250 x 600 x
70 mm 70 mm
51 kg 62 kg
1.15 kW 1.45 kW
1.15 kW 1.45 kW
1.15 kW 1.45 kW
0.0 W 0.0 W
0.0 W 0.0 W
0.0 W 0.0 W
English
MH 17
1350 x 600 x
70 mm
70 kg
1.65 kW
1.65 kW
1.65 kW
0.0 W
0.0 W
0.0 W
EN-4