Technical Data - Dimplex IRC 400 A Instructions De Montage Et D'utilisation

IRC – Infrared heating
6. Cleaning
The device must be switched off and must have
cooled down before cleaning. Set the room thermo-
stat to OFF. Clean the outside of the device using a
soft hand brush.
Do not use any fluid, scouring powder or other chem-
icals, as they could damage the surface.
7. Warranty
This product is supplied with a two-year warranty ac-
cording to our terms of guarantee.
8. Note on disposal
Do not dispose of the device with general
household waste. The device must be taken to
a local waste disposal plant.

9. Technical data

Device type
Nominal voltage
Degree of protection
Dimensions (W x H x D)
Weight
Heat output
Nominal heat output
Minimum heat output (guide value)
Maximum continuous heat output
Self consumption
With nominal heat output
With minimum heat output
In standby state
Regulator for heat output
External electronic room temperature controllers with week pro-
gramme and adaptive control of the heating start, as well as other
energy saving functions where applicable.
Glen Dimplex Deutschland GmbH
Am Goldenen Feld 18
D - 95326 Kulmbach
www.dimplex.de/en
IRC 400 A
1/N/PE, ~230V
50 Hz
IP44, splash-
proof
900 x 450 x 45
mm
14,8 kg
P 0.4 kW
nom
P 0.4 kW
min
P 0.4 kW
max,
C
el 0.0 W
max
el 0.0 W
min
el 0.0 W
SB
Tel.: +49 9221 709 700
Fax.: +49 9221 709 701
E-mail: info@gdhv.one
2001/A
English
EN-4