Selecting The Operating Mode - Dimplex DX 410E Instructions De Montage Et D'utilisation

DX 410E - DX 430E
9. Operation
9.1

Selecting the operating mode

Pressing the MODE key switches the operating mode
between MANUAL ON, MANUAL OFF and AUTO.
MANUAL ON
Manual heating operation switched on.
Display alternates between room temperature set-
ting and the current time.
Room temperature is set with +/-.
MANUAL OFF
Heating operation switched off.
The current time is displayed.
Room temperature cannot be set.
NOTE NOTE
In MANUAL OFF operating mode, frost protection
takes place. If the room temperature is 5° C or less, the
heating device is switched on automatically.
AUTO
Automatic mode (week program) activated.
Display alternates between room temperature set-
ting and the current time.
Heating operation takes place in the specified time
blocks for ON and OFF.
Room temperature is set with +/-.
No times blocks are specified at the factory. These
must be defined by the user as required.
NOTE NOTE
In time block OFF, frost protection is set at the factory.
If the room temperature is 5° C or less, the heating de-
vice is switched on automatically.
www.dimplex.de/en
9.2 Automatic mode (week program)
NOTE NOTE
For extended operation, it is advisable to use the
AUTO operating mode to reduce the operating costs.
Four times blocks are available per day. These can be
adapted individually for each weekday.
Select AUTO operating mode by pressing the
MODE button.
Press the PROG key.
WEEKDAY display flashes.
Order from top to bottom:
M = Monday,
T = Tuesday,
W = Wednesday,
T = Thursday,
Use the +/- keys to set the weekday.
Setting time block ON
Press the ENTER key. P1 (program 1) and ON ap-
pears. The hours display flashes.
Use the +/- keys to set the hours. Press the ENTER
key. The minutes display flashes.
Use +/- to set minutes (in 10 minute increments).
Setting time block OFF
Press the ENTER key. P1 (program 1) and OFF
appears. The hours display flashes.
Use the +/- keys to set the hours. Press the ENTER
key. The minutes display flashes.
Use the +/- keys to set the minutes.
Temperature setting
Press the ENTER key. Temperature setting ap-
pears.
Use the +/- keys to set the temperature.
Press the ENTER key. P2 (program 2) and ON ap-
pears. The hours display flashes.
The programs P2, P3 and P4 can be set in the same
way.
1810/D
English
F = Friday,
S = Saturday,
S = Sunday.
EN-4