Makita DMR300 Manuel D'instructions page 16

Listening to Bluetooth
You need to pair your Bluetooth
before you can auto-link to play/stream Bluetooth
music through your radio. Paring creates a permanent
"bond" so two devices can always recognize each other.
Pairing your Bluetooth
1. Press the Source button
function. "READY BLUETOOTH" will be shown on the
display and "READY" will flash.
®
2. Activate Bluetooth
the device's user manual to allow the paring procedure.
3. Press and release the Pair button
BLUETOOTH" will be shown on the display and it will
flash. You can start the search of your radio on your
®
Bluetooth device. Once the name of your radio is
appeared on your Bluetooth
®
your Bluetooth list.
NOTE: With some mobiles (versions earlier than
®
BT2.1 Bluetooth device), you may need to input the
pass code "0000".
®
4.
Your Bluetooth device will be linked with the
radio. Once connected, "CONNECTED BLUETOOTH"
will appear on the display.
You can now play the music in your Bluetooth
via your radio.
Playing Bluetooth
already paired
1. Press the Source button
function. "READY BLUETOOTH" will be shown on the
display and "READY" will flash.
2. Search and link the radio on your Bluetooth
device. Some device may link with the radio
automatically.
You can now play the music in your Bluetooth
via your radio.
NOTE: The radio can pair with 8 Bluetooth
at most. When you pair Bluetooth
this number, pairing history will be overwritten from
the oldest pairing history.
NOTE: If there are 2 Bluetooth
your radio, it will show its availability on both devices.
NOTE: If your Bluetooth
connected to your radio, then you need to manually
reconnect your device again to the radio.
NOTE: If the name of your radio is appeared on your
®
Bluetooth device list but your device cannot connect
with it, delete the item name of your radio from your
list and pair the device with your radio again following
the steps described previously.
NOTE: The optimum operation range between the
radio and the paired device is approximately 10
meters (30 feet).
NOTE: Any obstacle between the radio and the
device can reduce the operational range.
®
music
®
device with your radio
®
device
to select Bluetooth
on your device according to
. "PAIR
®
device, press the item in
®
device
®
device which has
to select Bluetooth
®
®
device
®
devices
®
devices more than
®
devices searching for
®
device is temporarily dis-
Disconnecting your Bluetooth
device
1.
Press and hold the Pair button
®
seconds to disconnect with your Bluetooth® device.
" CONNECTED BLUETOOTH" will turn to be "PAIR
BLUETOOTH".
2. Press the Power button
®
Language options
For DMR301 only
There are four language options available in the radio:
English, Italian, French, and German.
1. Press the Source button
mode.
2. Press and hold the Menu/Info button
few seconds until you hear a beep.
3. Rotate the Tuning Control knob
shown on the display. Press the Tuning Control
knob to enter the setting.
4. Rotate the Tuning Control knob
<Language>.
5. Rotate the Tuning Control knob
the language and press the Tuning Control knob
confirm.
System reset
For DMR301 only
If your radio fails to work correctly, or some digits on the
®
display are missing or incomplete, carry out the follow-
ing procedure.
1. Press the Source button
mode.
2. Press and hold the Menu/Info button
few seconds until you hear a beep.
3. Rotate the Tuning Control knob
shown on the display. Press the Tuning Control
knob to enter the setting.
4. Rotate the Tuning Control knob
<Factory Reset>. Press the Tuning Control knob
confirm the setting (<Yes>) and a full reset will be
performed.
Software version
For DMR301 only
1. Press the Source button
mode.
2. Press and hold the Menu/Info button
few seconds until you hear a beep.
3.
Rotate the Tuning Control knob
shown on the display. Press the Tuning Control
knob to enter the setting.
4. Rotate the Tuning Control knob
Version> and press the Tuning Control knob
view the software version installed in the radio.
16 ENGLISH
®
for a few
.
to select DAB radio
for a
INFO
MENU
until <System>
to choose
to choose
to
to select DAB radio
for a
INFO
MENU
until <System>
to choose
to
to select DAB radio
for a
INFO
MENU
until <System>
to choose <SW
you will