Makita DMR300 Manuel D'instructions page 14

Display modes – DAB
Your radio has a range of display options for DAB radio
mode.
Station name
Program type
Multiplex name
Time/Date
Frequency and channel
Bit rate/ Audio type
Signal strength
Setting the clock
Setting the time and date format
NOTE: The selected time and date format is also
used when setting the alarms.
1.
Press and hold the Menu/Info button
the menu setting.
2.
Rotate the Tuning control knob
appears on the display and press the Tuning control
knob to enter the setting.
3. Rotate the Tuning control knob
12/24 HOUR> appears on the display and press the
control knob to enter the setting.
4. Rotate the Tuning control knob
<12 HOUR> or <24 HOUR> format. Press the Tuning
control knob to confirm your choice.
NOTE: If the 12 hour clock format is chosen, the radio
will then use the 12 hour clock for the setting.
5. Press and hold the Menu/Info button
the menu setting.
6.
Rotate the Tuning control knob
appears on the display and press the Tuning control
knob to enter the setting.
7. Rotate the Tuning control knob
FORMAT> appears on the display and press the control
knob to enter the setting.
8. Rotate the Tuning control knob
desired date format (<DD/MM/YYYY> or <MM/DD/
YYYY>). Press the Tuning control knob
your choice.
Displays the name of the
station being listened to.
Displays the type of station
being listened to such as Pop,
Classic, News, etc.
Displays the name of the DAB
multiplex to which the current
station belongs.
Displays the time and date.
Displays the frequency and
channel number for the cur-
rently tuned DAB station.
Displays the digital audio bit
rate and audio type for the
currently tuned DAB station.
Displays the signal strength
for the currently tuned DAB
station.
to enter
INFO
MENU
until <TIME>
until <SET
to select either
to enter
INFO
MENU
until <TIME>
until <DATE
to select the
to confirm
Setting the time
1. Press and hold the Menu/Info button
2. Rotate the Tuning control knob
appears on the display. Press the Tuning control
knob to enter the setting.
3. Press the Tuning control knob
TIME> appears on the display to enter the setting.
4. The hour setting on the display will begin flashing.
Rotate the Tuning control knob
hour, and press the Tuning control knob
the setting. Then rotate the Tuning control knob
select the desired minute, and press the Tuning control
knob to confirm the setting.
Setting the date
1.
Press and hold the Menu/Info button
2.
Rotate the Tuning control knob
appears on the display. Press the Tuning control
knob to enter the setting.
3. Rotate the Tuning control knob
DATE> appears on the display. Press the Tuning control
knob to enter the setting.
4. Rotate the Tuning control knob
desired year and press the Tuning control knob
confirm the setting. Then rotate the Tuning control
knob to select the desired month, and press the
Tuning control knob
rotate the Tuning control knob
date and press the Tuning control knob
the setting.
Setting the alarm clock
Your radio has two alarms which can each be set to wake
you to AM/FM/DAB radio or buzzer alarm. The alarms may
be set while the unit is in standby mode or while playing.
Setting radio alarm time
1. Press and hold the radio alarm button
alarm symbol and the display hour will flash along with a beep.
2.
While the radio alarm symbol
rotate Tuning control knob
Tuning control knob
rotate the Tuning control knob
press Tuning control knob
3. Rotate the Tuning control knob and the display will
show the frequency options for the alarm.
The alarm options are as follows:
ONCE
DAILY
WEEKDAYS
WEEKENDS
14 ENGLISH
INFO
MENU
until <TIME>
while <SET
to select the desired
to confirm
INFO
MENU
until <TIME>
until <SET
to select the
to confirm the setting. Then
to select the desired
to confirm
is flashing,
to select the hour and press
again to confirm hour setting. Then
to select the minute and
to confirm minute setting.
The alarm will sound
once
The alarm will sound
everyday
The alarm will sound only
on weekdays
The alarm will sound only
at weekends
.
to
.
to
, the radio