Makita DMR300 Manuel D'instructions page 15

Press the Tuning control knob
4.
Rotate Tuning control knob
(FM/AM/DAB) and press Tuning control knob
to confirm the setting.
5. Rotate Tuning control knob
LISTENED> or <PRESET NO.> and press Tuning
control knob again to confirm the setting.
6. Rotate Tuning control knob
desired volume and press Tuning control knob to con-
firm the volume. Radio alarm setting is now completed.
NOTE: If new radio alarm station is not selected, the
radio will select the last alarm station.
Setting HWS (Humane Wake System)
buzzer alarm
A beep tone will activate when selecting the HWS
buzzer alarm.
The alarm beep starts to ring and it becomes quicker
as the time elapses. The alarm beep continues to ring
for one minute and stops. After one minute silence, the
alarm beep resume ringing. The alarm beep repeats
this cycle until you press the Power button
NOTE: The buzzer alarm can be set when the radio
is turned off.
1. Press and hold the buzzer alarm button
the symbol and the display hour will flash along with a
beep.
2.
While the buzzer alarm symbol
rotate Tuning control knob
press Tuning control knob
setting. Then rotate the Tuning control knob
the minute and press Tuning control knob
minute setting.
3. Rotate the Tuning control knob
will show the frequency options for the alarm.
The alarm options are as follows:
ONCE
DAILY
WEEKDAYS
WEEKENDS
4. Press the Tuning control knob
setting.
NOTE: There is no volume adjustment for buzzer
alarm.
When the alarm sounds
To cancel a sounding alarm, press the Power but-
ton .
to confirm the setting.
to select the band
again
to select <LAST
to select the
.
,
is flashing,
to select the hour and
again to confirm hour
to select
to confirm
and the display
The alarm will sound
once
The alarm will sound
everyday
The alarm will sound only
on weekdays
The alarm will sound only
at weekends
to confirm the
Disabling/cancelling alarms
To disable an active alarm, press and hold the corre-
sponding alarm button to cancel the alarm.
Snooze
When the alarm sounds, press any button other than
the Power button
"SNOOZE" will appear on the display.
To adjust the silence time, follow the procedures below:
1. Press and hold the Menu/Info button
the menu setting.
2. Rotate the Tuning control knob
appears on the display. Press the Tuning control
knob to enter the setting. Rotate the Tuning control
knob to adjust the silence time from 5, 10, 15 and 20
minutes.
NOTE: To cancel the snooze timer while the alarm is
suspended, press the Power button
Sleep timer
Your radio can be set to turn off automatically after a
preset time has elapsed. The Sleep Timer setting can
be adjusted for 15, 30, 45, 60, 90, or 120 minutes.
1.
Press and hold the Power button
the Sleep Timer setting. "SLEEP 60 MINUTES" will be
shown on the display.
2. Keep holding the Power button
timer options will start switching on the display. Release
the Power button
setting appears on the display. The setting will be saved
and the icon for sleep timer (
display.
NOTE: Your radio will switch off automatically after
the preset Sleep Timer has elapsed.
NOTE: To cancel the sleep timer before the preset
time has elapsed, simply press the Power but-
ton to turn the radio off.
Loudness
You can get compensation on lower and higher
frequency for your radio by adjusting the loudness
function.
1. Press and hold the Menu/Info button
the menu setting.
2. Rotate the Tuning control knob
<LOUDNESS> appears on the display. Press the
Tuning control knob to enter the setting.
3. Rotate the Tuning control knob
<ON> or <OFF> to turn on or turn off the loudness func-
tion, then press the Tuning control knob
the setting.
NOTE: To turn off the loudness function, select
<OFF> and press the Tuning control knob
firm the setting.
15 ENGLISH
to stop the alarm for 5 minutes.
INFO
MENU
until "SNOOZE"
.
to enter
. The sleep
when the desired Sleep Timer
) will appear on the
INFO
MENU
until
to choose
to confirm
to enter
to enter
to con-