Nolan N808 Instructions D'utilisation page 24

N80-8
Top ventilation
It allows diffuse ventilation to the top of the head, even at low speed.
See Fig.26 for opening and closing instructions.
Rear ventilation
It is integrated in a rear spoiler and allows warm and stale air to flow out, ensuring an
optimum comfort inside the helmet (Fig.27).
SETTING UP THE N-COM - HELMET COMMUNICATION SYSTEMS
(Available depending on the product version)
Your helmet is factory-preset to be equipped with the N-Com communication system.
If your helmet is approved according to ECE/UN Regulation No. 22, it has also been
tested and approved with the N-Com system installed. The installation of a system
other than N-Com compromises the helmet regulatory compliance.
During the communication system installation (see the specific instructions contained
in the N-Com kit), it will be necessary to remove from the helmet the foam material fillers
located in the polystyrene cheek pads next to the N-Com earphones seats.
The above-mentioned fillers should only be removed if the helmet is used with a
compatible N-Com system installed.
24
INSTRUCTIONS FOR USE