Whirlpool URB551WNGZ Mode D'emploi page 9

14� Screw the top hinge (use hexagonal screws).
15� Press the plugs into place.
C. Cap plug
Reverse Handles (if previously installed)
WARNING
Electrical Shock Hazard
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
1. Unplug refrigerator or disconnect power�
2. Using a TORX T15 , remove the handles from the left-hand
® ®
side of the door and remove the hole plugs from the right-
hand side�
3. Insert the hole plugs (from the Reversibility Kit) into the holes
remaining after the removal of the handles�
4.
Install the door handles on the opposite side of the door�
9