Télécharger Imprimer la page

Metabo HPT NR 83A5 Mode D'emploi page 17

Publicité

Les langues disponibles

Les langues disponibles

● Use nail strip of more than 5 nails.
The Nailer is now ready to operate.
Removing the nails:
● Disconnect air hose from Nailer when
removing nails from the magazine.
Pull the nail feeder (B) backward.
Return the nail feeder (B) forward quietly while
pushing the nail feeder (A).
Push the nail stopper toward the magazine side,
and pull out nails from the back of the magazine.
Nails
WARNING
Nail Feeder (A)
Nail Feeder (B)
Nail Stopper
NAILER OPERATION
Read section titled "SAFETY" (pages 3–7).
● Operators and others in work
Ordinary eyeglasses do not
provide adequate protection.
● Only person who have read
● NEVER point tool at yourself
● Keep fi ngers AWAY from trigger when not
driving nails to avoid accidental discharge.
● Know and understand what trigger system
you are using.
Please read and understand "Methods of
Operation" below.
● Inspect the Nailer before operating to
determine actuation system.
Before starting work, check the nailing
operation switching device.
This metabo HPT nailer includes a nailing
operation switching device.
Before starting work, make sure that the
switching device is properly set.
If the switching device is not set properly, the
nailer will not operate correctly.
● Never place your hands or body closer than 8
inches (200 mm) from fi ring head when using.
● Do not drive nails into other nails; nails can
ricochet and hurt someone.
● Do not actuate Nailer unless Nailer is placed
fi rmly against the workpiece.
● When working close to an edge of a
workpiece or at steep angles, or driving
fasteners into thin workpiece use care to
minimize chipping, splitting or splintering, or
free fl ight, ricochet or piercing of fasteners,
which may cause injury.
● Never drive nails from both sides of a wall
at the same time. Nails can be driven into
and through the wall and hit a person on the
opposite side.
English
DANGER
area
MUST
wear
glasses with side shields
which conforms to ANSI Z87.1
specifi cations.
WARNING
and understand this MANUAL
should operate the Nailer.
or others in work area.
safety
17

Publicité

loading

Ce manuel est également adapté pour:

Nr 83a5 sNr 83a5 yNr 83a5 s1Nr 83aa5