Kärcher K 2.26 Manuel D'utilisation page 6

ASSEMBLY INSTRUCTIONS
STEP 1:

Insert wheels into the body of the unit.
STEP 2:

Install the supplied connector to the
unit's water inlet.
Note: Never attach the garden hose
connector to the unit's water inlet!
STEP 3:

Fasten the quick connect to the high
pressure outlet.
STEP 4:

Insert one end of the high pressure
hose into the trigger gun until it locks
audibly.
Note: Make sure the connection nip-
ple is aligned correctly. Check the
connection by pulling on the high
pressure hose.
Check the secure connection by pull-
ing on the high pressure hose.
6 English
Disconnect:
Press the disconnect key on the trig-

ger gun and remove the high pres-
sure hose from the trigger gun.
OPERATING
INSTRUCTIONS
STEP 1:

Insert one end of the high pressure
hose tightly into the quick connect on
the unit, it will lock in audibly.
Note: Make sure the connection nip-
ple is aligned correctly. Check the
connection by pulling on the high
pressure hose.
Check the secure connection by pull-
ing on the high pressure hose.
STEP 2:

Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.